Basic Info.
Application Field
General
Stratification
Operating System Layer
Range of Application
General
Product Description
Rockchip RK3399 based Single Board Computer OK3399-C
OK3399-C is RK3399 single board computer ( development board) which consists of two Cotex-A72 featuring cores with frequency up to 1.8GHz and four Cortex -A53 featuring cores with frequency up to 1.4GHz. It's integrated with GPU Mali-T864, can support OpenGL ES1.1/ 2.0/ 3.0/ 3.1, OpenVG1.1, OpenCL and DX11. It has on-board 2GB LPDDR3 RAM and 16GB eMMC. A variety of display interfaces such as HDMI2.0, MIPI-DSI, eDP1.3 and DP1.2 are all available and resolution up to 4K. Dual-screen both synchronous and asynchronous playing are well supported. Besides, it carries PCIe, USB3.0 Host, Type-C, MIPI-CSI, SPDIF, IIC, SPI, UART, ADC, PWM, GPIO, IIS(8 digital micphone array input) and Ethernet on board.
Target application
Self-service terminal
Edge computing
5G Smart terminal
POS machine
Facial recognition
FET3399-C System on Module Hardware Features
CPU | RK3399 hexa-core, Big.Little architecture
Cortex-A72 Core:
• 2x Cortex-A72
• up to 1.8GHz
• 64-bit Armv8
Cortex-A53 Core:
• 4x Cortex-A53
• up to 1.4GHz
• 64-bit Armv8 |
GPU | 3D graphical engine:
• quad-core Mali-T860MP4
• can support OpenGL ES1.1/2.0/3.0/3.1
• can support OpenCL 1.2 2D graphical engine:
• source form:
ARGB, RGB888, RGB565, RGB4444, RGB5551, YUV420, YUV422(SupportYUV422SP10bit/YUV420SP10bit)
• target form:
ARGB, RGB888, RGB565, RGB4444, RGB5551, YUV420, YUV422(SupportYVYU422/420 output) • maximum resolution: source 8192x8192, and target 4096x4096 |
VPU | Decode:
• H.265/HEVC, up to 4Kx2K @ 60fps
• VP9, up to 4Kx2K @ 60fps
• H.264/AVC, up to 4Kx2K @ 30fps
• MPEG-1,ISO/IEC 11172-2, up to1080P @ 60fps
• MPEG-2,ISO/IEC 13818-2, up to 1080P @ 60fps
• MPEG-4,ISO/IEC 14496-2, up to 1080P @ 60fps
• VC-1, up to 1080P @ 60fps
• MVC based on H.264 or H.265, up to 1080P @ 60fps Encode:
• 1080p30 AVC/H.264
• 1080p30 VP8 |
RAM | • 2GB(optional 4GB)
• LPDDR3 1600 |
ROM | • 16GB(optional 32GB) • eMMC 5.1 storage
• HS400 mode |
Working Temperature | 0ºC~80ºC |
Dimensions | 46mm x 70mm |
Voltage Input | 12V |
OS | Android 7.1,Linux* |
| Interface | Spec. |
Display | dual-screen engine up to 4096x 2160 and 2560x 1600, can output from below ports: MIPI-DSI ≤2
• CPU has 3 built-in MIPI PHY, MIPI0 can be only used as DSI, MIPI1 can be used as DSI or CSI, MIPI2 can be only used as CSI • each DSI port has 4 data lanes, can support data transferring rate up to 6.0Gbps • each DSI port can support output up to 1080P@ 60FPS • MIPI0 and MIPI1 combination can support output 2560x 1600@ 60FPS eDPx1
• eDP V1.3 • RGB 6/ 8/ 10-bit • 4 data lanes, each 2.7/ 1.62Gbps • can support PSR DP x1
• Display Port V1.2 • compatible with HDCP2.2(backward compatible with HDCP1.3) • only has one built-in DP controller, can output from Type-C* • support outputting up to 4Kx 2K@ 60Hz HDMI x1
• HDMI1.4, HDMI2.0 • up to 18Gbps port trunks • up to 180P@ 120Hz, 4Kx 2K@ 60Hz, QXGA@ 120Hz • HDCP1.4/ 2.2 |
Audio | I2S/PCM x3
• I2S0/I2S2 can support 8-channel TX/RX. I2S1 can support -channel TX/RX
• IIS2 internally connected to HDMI and DisplayPort, IIS0 and IIS1 are for peripherals
• audio resolution from 16-bit to 32-bit
• sampling rate up to 192KHz
SPDIF
• can support two 16-bit audio data stored in one 32-bit width location
• can support two-phase formed stereo audio output
• can support 16-bit to 31-bit audio data left or right justified in 32-bit width sampling data frame zone
• can support 16-bit, 20-bit, 24-bit audio data transferring in PCM mode
• can support none-PCM mode |
Camera | MIPI CSI ≤2
• can support one 13.0MP camera or two 8.0MP cameras
• two internal ISP
• one ISP with resolution up to 14.0 MP
USB UVC
• USB UVC camera input |
USB
Type-C | • USB Type-C x2(multiplexed with USB 3.0)
• USB Type-C 1.1
• can support USB3.0 Type-C and DP 1.2* can switch to USB Type-C mode
• USB3.0 up to 5Gbps
• DP1.2 up to 5.4Gbps(HBR2), can support 1/2/4 mode*
• DisplayPort with AUX channel* |
USB OTG3.0 | • USB OTG 3.0 x2( contains USB OTG 2.0 x2)
• compatible protocol: USB 3.0,USB 2.0,USB Host 1.1
• USB 3.0 in full-duplex mode up to 5Gbps band width |
USB 2.0 | • USB 2.0 Host x2(separated, not multiplexed with 3.0)
• compatible with USB 2.0
• can support high speed mode(480Mbps), full speed mode (12Mbps) and low speed mode(1.5Mbps) |
SD/MMC | • SD/MMC x2
• can be configured to SD/MMC or SDIO
• compatible with SDIO 3.0
• 4-bit data bus |
Ethernet | • Gigabit Ethernet x1
• RGMII is available for 10/100/1000-Mbps
• RMII is available for 10/100-Mbps |
SPI | • SPI x5
• can support serial host and slave mode, software configurable
• operation based on DMA or interrupt
• TX and RX are 32x16-bit FIFO |
UART | • UART x5
• operation based on DMA or interrupt
• TX and RX are 64Bytes FIFO
• each serial up to 4.0 Mbps |
I2C | • I2C x7
• multi-host machine I2C
• standard mode up to 100 kbit/s
• fast mode up to 400 kbit/s |
PCIe | • PCIe x 1
• compatible with PCI Express revised 2.1
• 4 full-plex channel
• each channel can support 2.5GT/s to each direction
• dual-operation mode: Root Complex(RC) and End Point(EP) |
PWM | • PWMs x 3
• operation based on interrupt
•32-bit timer/ counter
• can support capture mode
• can support continuous mode or one-time mode |
ADC | • ADC x 5
• successive approaching ADC
•10-bit
• switch rate up to 1MS/ s for sampling |
OK3399-C Single Board Computer Hardware Features
| Functional Interface | Spec. |
| Power In | DC12V |
| HDMI | • HDMI1.4, HDMI2.0 • up to 18Gbps port trunks • up to 180P@ 120Hz, 4Kx 2K@ 60Hz, QXGA@ 120Hz • HDCP1.4/ 2.2 |
USB Type-C | • install or update system by USB type-C
• USB Type-C 1.1
• can support mode switching between USB Type-C and DP1.2*
• USB3.0 transferring rate up to 5Gbps
• DP1.2 transferring rate up to 5.4Gbps(HBR2), can support 1/ 2/ 4 mode*
• DisplayPort can support AUX channel* |
TF Card | • install or update system by TF card
• can support 1.8V* and 3.3V mode |
USB3.0 | • protocol: USB3.0, USB2.0, USB Host 1.1
• USB full-duplex mode transferring rate up to 5Gbps |
USB 2.0 | • USB 2.0 Host x4, USB 2.0 Host Type-A x 2
• expandable by HUB which is same with 4G and P28 • USB 2.0 Host XH2.54 x 2
• P29 is a native USB • P28 is expanded by HUB |
IO Expand | • SPI x 2
• can support serial host and slave modes, software configurable
• operation based on DMA or interrupt • TX and RX are 32x16-bit FIFO
UART x1
• it's configured to GPS in Android system
• multi-plexed with SPI1
I2C x1
• multi-host IIC
• standard mode up to 100 kbit/s
• fast mode up to 400 kbit/s
ADC x2
• successive approaching ADC
• 10-bit
• sampling rate up to
GPIO x4
• 1.8V |
4G | • Mini PCIe package |
| Debug | • Micro USB connector • on-board USB to serial chip(CP2102) |
Ethernet | • 10/100/1000-Mbps auto-negotiation, RJ 45 connector |
| Camera | • MIPI CSI x2
• can support 1x 13MP or 2x 8.0MP |
VoL | • it's configured to audio volume adjusting keys in Android system
• VoL+ is a Recover key, press it to start OTG flashing mode |
3.5mm Earphone | • can support MIC and Headphone
• CTIA standard and can support earphone line controlling |
Speaker | • output consumption rate up to 1W
• can support D-amplifier output |
WIFI& BT | • WIFI
• IEEE 802.11b/g/n & Wi-Fi AP 2.4GHz
• IEEE 802.11a/n/ac & Wi-Fi AP 5GHz
• SDIO3.0@ WiFi BT
• BT5.0 • UART/ PCM@ BT • can support slave mode and slave mode |
eDP | • eDP v1.3
• 4 data lanes, each 2.7/ 1.62 Gbps
• supported with a 12V power interface, backlight enabled and backlight adjusted by PWM |
| MIPI-DSI | • 4 data lanes, each 6.0 Gbps
• each up to 1080P@ 60FPS |
| M.2 | • PCIe x 4 full-duplex • each channel serial data transferring rate up to 2.5GT/ S to each direction • M.2 KEY M connector • preserved with 2260 and 2280 mounting holes for M.2 device • can support NVMe static hard disk |
Address:
No. 2699, Xiangyang North Road, Baoding, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
As a member unit of CSIA (China Software Industry Association) Embedded System Branch, Forlinx Embedded Tech Co., Ltd. Has gathered groups of professionals with capability to design, prototype and manufacture printed circuit boards, sub-assemblies and complete electronic products. Since the year of 2003, Forlinx is committed to the development of 8051, ARM7, ARM9, ARM11, Cortex-A8, Cortex-A9 and PowerPC based Embedded Systems (system on modules, development kits, evaluation boards, single board computers, software, applications and operating systems for embedded systems) for seven years. Through the 8 years, our devoutness to high quality, low price and comprehensive service has made us flourish in a very competitive marketplace.
On the ground of experiences accumulated from years of practices, our engineers are also enthusiastic in new custom designs. Our custom design service has been so far applied to industrial control equipments, digital consumables, video monitoring and transmitting systems, remote medical monitoring devices, hand-held industrial instruments, communication gateways, T1/E1 communication device applications, etc. No matter it is high-quality and reliable embedded system, or low cost evaluation tools that you need, we are your partner of choice.
